|Written by C. L. Easey|
The KX-TG2335 model of cordless phone is compatible with Caller ID and also includes a power cord, telephone cord and a belt clip for use with the handset. Using the phone will first require setting up and connecting the base unit to the phone line in your home. You can then use the handset to make and receive calls.
Set Up Base Unit
Step 1: Place the base of the phone in a central area and near a phone line.
Step 2: Plug one end of the telephone line into the jack on the bottom of the phone. Plug the other end of the telephone line into the jack on the wall.
Step 3: Insert the small end of the power cord into the â€śAC INâ€ť port on the phone base. Plug the other end of the power cord into an electrical outlet.
Step 4: Lift the antenna on the side of the base into an upright position.
Making a Call
Step 1: Press the button on the headset with the picture of a phone. This will activate the headset and you will see â€śTalkâ€ť in the display window.
Step 2: Press the numbers on the keypad to enter a dial a phone number.
Step 3: Press the â€śOffâ€ť button to hang up or disconnect from the call. You can also place the handset back in the base.
Press the â€śRedialâ€ť button to dial the same number again.