How to Adjust the Picture on a Pioneer Plasma TV

Pioneer makes many types of products for the consumer, including a plasma televisions. One model of plasma TV is the PDP-6020FD, for a TV stand or a tabletop. This television has an Ethernet port to connect to a wired network. One option that you are able to adjust by using the remote control is the Convergence. The convergence is when the settings for the picture on the screen are equalized.

Set Picture Position

Step 1:Press the “Setup” button on the remote. This will display the Setup Menu.

Step 2: Press the “Up” or “Down” arrow buttons and highlight “Option.” Press the “Enter” key.

Step 3: Press the “Up” or “Down” arrow buttons and highlight “Position.” Highlight the “H/V Position Adjust” option from the list in the submenu. Press the “Enter” key.

Step 4: Press the “Home Menu” button to exit the Setup Menu.

Reset the Default

Step 1: Press the “Setup” button on the remote to display the Setup Menu.

Step 2: Press the “Down” arrow button on the remote and highlight the option for “Reset.” Press the “Enter” button.

Step 3: Press the “Up” or “Down” arrow buttons and highlight the option for “Yes.”

Step 4: Press the “Enter” button to reset the setting back to the factory default.

Step 5: Press the “Home Menu” button to exit the Setup Menu.

Tips

View an on-screen graphical display by accessing the Setup Menu, selecting the option for “Picture,” “AV Selection,” “Optimum,” and then “Optimum Performance.”

Comments (0)