Home Arts & Crafts General Arts & Crafts How to Make Glowing Neon Bottles

How to Make Glowing Neon Bottles

(1 vote, average 5.00 out of 5)
Written by Susan   



Tags:

Glowing Neon BottlesInfo:

Glowing neon bottles are a great way to decorate for a party or just a nice way to add a little unusual flare to you home. These great Glowing neon bottles are very inexpensive and easy to make.

You could buy glowing neon bottles for a hefty price but these instructions will show you how to make them for much less. So why not save a fortune and follow these great instructions to make your own glowing neon bottles.

Things you will need:

Empty clear glass bottle with a lid

Highlighter

2 Needle nose pliers

Water

Rubbing alcohol

Blacklight

Step 1:

To make your glowing neon bottle you will need to first make sure your clear glass bottle is clean, you dont want things floating in your bottle.

Step 2

Once your bottle is clean you will need to add water to your bottle, fill until about a half an inch from the top of the bottle and set aside for now.

Step 3

Now to make your glowing neon bottle you will need to take apart your highlighter. To take apart the highlighter you will need to use one pair if the needle nose pliers and pull off the end cap part of the
highlighter. Now use the needle nose pliers to take the color stick out of the highlighter.

Be careful not to touch the color stick or it can stain your clothes and skin.

Step 4

After you have the color stick out of the highlighter you will need to add the color into your glass bottle to make your glowing neon bottle. To do this just use the other pair of needle nose pliers and squeeze the color stick while it is directly over the clear glass bottle.

The highlighters color will drip into the water of the clear glass bottle. Continue to do this until you have your desired color, you may need to use more than one highlighter to get the desired color.

Step 5

Now you will need to add enough rubbing alcohol to the clear glass bottle to make sure it us completely filled. The rubbing alcohol is not mandarory but it will help keep the water from molding.

Step 6

Seal the bottle with it's lid making sure it is as tight as possible to keep the water from evaporating.

Step 7

Now shake the bottle to evenly distribute the highlighters color. Place a black light behind the glowing neon bottle, making sure it is not touching the bottle and you are ready to enjoy.






Comments (0)add comment


Write comment
You must be logged in to post a comment. Please register if you do not have an account yet.

busy